Lumilor

About Lumilor

Simply turn any paintable substrate you want into a lamp using a 12-18dc volt power supply included with every job. What you are looking at is not LED's, or a light bulb, this is indeed a paint job. Because it is paint, we have the ability to hydro dip over it or you can have your favorite air brusher paint right over it. This product comes in 5 different colors. Blue, Green, Aqua, White, and Orange. Possibilities are endless, and only limited to your mind!

How much would this cost?

Cost is based off of the total sq.in. of each part. Please fill out the form below, and we would gladly provide you with a personalized quote.

What are the basic properties of Lumilor?

* Cool to the touch even when emitting light
* Has a thickness of approximately 4.6 mils when applied according to specifications
* Is flexible to nearly 180 degrees
* A field (one "light bulb" painted with LumiLor) should not exceed 3 square feet
* A small inverter will power up to 1 square foot
* A large inverter will power up to 2 square foot
* Areas as small as 1/4 inch can be illuminated with LumiLor ( pinstriping, graphics, etc).
However, a minimum surf area of 1 square inch is needed to apply Lumilor.

How is LumiLor applied?

Lumilor is applied using a professional HVLP (high volume low pressure) paint system. The skills needed to apply LumiLor are similar to the skills needed to apply other professional grade coatings with an HVLP system.
LumiLor is a four layer coating system and the application includes processes and specifications which are unique to LumiLor. Three to five hours is needed to apply all of the layers of LumiLor in standard conditions.
LumiLor should be applicator in an ambient temperature of at least 70 degrees Fahrenheit.
Mass application of LumiLor for OEM partners is available.

What color is LumiLor when lit and unlit?

LumiLor is available in five native colors, these are colors you see when LumiLor is lit.
Aqua, Blue, Green, Orange, and White
LumiLor appears as a gray hue, similar to an automotive primer, when unlit.
Topcoats (airbrushing, tinted clear coats, colored top coats, hydrographics, etc.) can alter the appearance of the LumiLor to create a desired effect.

What about red?

You want red LumiLor, we want red LumiLor, everyone wants red LumiLor. Why is there no red LumiLor?
Red tones can be achieved by topcoating LumiLor with tinted clear coats or colored top coats such as candies and pearls, or even with hydrographics. This is typically applied on white LumiLor to provide the most true color effect.

How long will LumiLor last?

The lifespan of LumiLor is dependent on how much power is applied and the native LumiLor color used. More power equals brighter light but a shorter half life. 'Half life' is not an indication of total useful life. LumiLor will degrade in brightness up to the half life, and then plateau. There are documented applications of electroluminescence using materials identical to the main components of LumiLor where the useful life of the product has been measured over 10,000 hours, and in some up to 50,000 hours.

Applications

The applications for LumiLor are vast, yet its full potential is still being realized as LumiLor works with partners to conceive, develop and implement further ideas for commercial use. The following examples are some of the applications for LumiLor.

Transport – vehicles, helmets, drones
Visuals – visual effects, special effects, aesthetic lighting
Advertising – attention, signaling, signage
Products – Game consoles, toys, musical instruments, sports equipment, household appliances
Safety – Mining, emergency lighting, night lighting
Architecture