LumiLor 101:
(Beginners class)
The following items are required for applying LumiLor and will be included in the class:
|
• Blacklight - wand, cannon, or bulb
• Well ventilated area • Compressor, airlines and fittings • HVLP gravity fed spray guns • Automotive grade clearcoat • Multimeter • Respirator • Nitrile gloves • Red Scotch Brite pads 320-400 grit • Rubbing alcohol • Blue fine line tape 1/2" |
• Green or Yellow masking tape 3/4" and 1/4"
• Masking paper 3" • Drill or Dremel with 3/32" drill bit • Tack rags • Touch up brush pack - varies sizes • Infrared heat gun 500-650 degrees Fahrenheit • Timer • Strainers 120-140 micron • Mixing cups 8 oz or 32 oz • Stir sticks- glass or plastic ** NO METAL OR WOOD ** |
• PPS system with attachments
• Spray suit • Paint stand and cart • Popsicle sticks (for J-B KwikWeld) • Mixing plate (for J-B KwikWeld) • 2 - Wash bottles (alcohol/thinner ) • Heat lamps and stand • UV Goggles (when using blacklight) |
Lumilor 101 Curriculum:
During this class, we will work 1 on 1 with each student and teach the following:
- 1.0 Coating Preparation
1.1.1 Backplane
1.1.2 Dielectric
1.1.3 LumiColor
1.1.4 Bus Bar
1.1.5 Conductive Clear
- 1.2 Surface Preparation
1.2.2 Bare Metals
1.2.3 Clear Coated Substrates
- 2.0 Masking Application
2.1.1 Substrate Masking
2.1.2 Backplane Masking
2.1.3 Bus Bar Masking
- 3.0 Coating Application
3.1.1 Backplane Application
3.1.2 Dielectric Application
3.1.3 Lumicolor Application
3.1.4 Bus Bar Application
3.2.1 Connectors Application
3.1.5 Conductive Clear Application
3.1.6 Encapsulating Clear
3.1.7 Black Out Application
3.1.8 Clear Top Coat
NOTE: class
- If you have already purchased a Lumilor kit and Unsuccessfully lit your first panel, this class is structured for you.
LumiLor 102:
(ADVANCE CLASS)
LumiLor 102 Curriculum:
This class will dive into detail! Learn how to unlock the full potential of the LumiLor paint system!
1.2 Steel (Gas Tank) Preparations 1.3 PP/ PC & ABS Plastic Preparations 1.4 Wood Preparations Key:
(T) - Theory (L) - Lab (L*) - Students may choose 2-3 options from the list to applicate in class. (Time sensitive) |
2.1.1 Plotting Individual Fields 2.1.2 Masking Individual Fields 2.1.3 Layer Application (L) 2.1.3.1 Backplane Application 2.1.3.2 Dielectric Application 2.1.3.3 LumiColor Application 2.2 Single/ Multiple Bus Bar Preparation (L) 2.2.1 Masking Procedures 2.2.2 Bus Bar Application 2.3 Single/ Multiple Connector Preparation (L) 2.3.1 Connector Application 2.3.2 Masking Procedures 2.4 Multiple Inverter Preparation (L) 2.4.1 Lumilor Surface Calculation 2.4.2 Choosing the proper Inverter 2.4.2.1 Single or Twin Inverter |
3.2 Pinstripe 3.3 Hidden Images (Ghosting) 3.4 Air Brushing 3.5 Design & Patterns 3.6 Hydro dipping 3.7 Candy Coats 3.8 Translucent Base Coats |
Our goal at the end of this class, is to have each student strongly understand the theory and hands on preparation / application of the LumiLor process. Students also will be ready to take on customer projects. After this class is completed, move on to Lumilor 103 troubleshooting
Note:
- This class is for individuals that have completed Lumilor 101 and/or have successfully lit a panel on there own.
On Sale
On Sale
LumiLor 101 & 102 (Single Student)
$3,500.00
$2,250.00
Beginners Class, and Advanced class. This will be a 5 day training class Starting at 9am-5pm (EST)
